A leaking water heater might or might not seem to be a large deal. Nevertheless, it does not matter if it is a substantial leak or a tiny leak, both may result in a lot of destruction to ones residence in the shape of water problems. Many times house owners fail to understand that a small leak is normally the indicator of something much larger which can be beginning to take place, or will happen in the not too distant future. In the worse scenario, that little leak may grow to be a huge flood if the water heater is close to completely giving out. No matter the reason, we are right here for helping with any sort of Lubbock Hot Water Heater Repair that may be necessary.

Apart from water damage to ones home by a leaking storage tank, there are actually health related concerns with almost any water leak within a home. The wetness may result in mold or mildew development. People who suffer from allergies or asthma, this is not a pleasurable problem. The EPA alerts that some mold spores are hazardous and can lead to serious health issues.

Fix any leaks in your home’s roof, walls, or plumbing so mold does not have moisture to grow.  http://www.cdc.gov/mold/dampness_facts.htm

Expecting that an ongoing water leak will correct on its own and just vanish is something which just does not happen sad to say. Plumbing leaks mainly become worse in time. We have composed a step-by-step list of measures to do during these situations.

Action Steps for Leaking Water HeatersLeaking Lubbock Water Heater

1. First make sure that it is the water heater that the leaking water is originating from.

If one experiences water around where the hot water heater is located, the leak may not necessarily be originating from it. Take a look at any water pipes or other items close to where the heater is situated. Are there some other equipment close which could form condensation? If ones heater is found inside a basement, this may be the case. It may sometimes be a furnace drain line as well, or coming from a water softener.

First, mop up the water and determine if it comes back any time before long by watching the location periodically. Analyze the water heater totally to verify if any water is originating from one of the fittings, T&P valve, or drain valve. When it is completely dry, continue to check out other things and areas close by.

When nothing else is wet in the general space, place paper towels on the ground in the spot which was previously wet. Examine each hour approximately to be sure the paper towels continue to be dry. It will probably be much easier to notice the paper towels becoming wet then the floor. Following a day if nothing at all is wet once more, there should be absolutely nothing to concern yourself with, nevertheless still keep a watch on it for a few days. If water is coming back, and there is absolutely no other origin close by that it might be from, we will continue to the next step at this point to diagnose the origin of the leak.Breaker Box for Lubbock Water Heater

2. Turn the water heater’s power off

Hopefully, it is well known that water and electrical power really do not work well together, therefore turn off the power for safety explanations.

For gas water heaters, there should be an on/off dial which should be set to the off placement. Leave the gas line on at this point still.

For electric heaters, head over to the house’s breaker box and shut off the breaker for the water heater.

3. Turn the water supply off

If one is without doubt the leak is because of the hot water heater, and in cases where it is rather substantial, switching the water off will remove the possibility of water continuing to fill the storage tank and leak in ones house. Once more, with a big leak coming from the heater, and if the shut off valve simply cannot be reached or if it is actually no longer working accurately, go find and shut off the main disconnect valve for the entire residence. If one remains unsure the leak is coming from the water heater, one can leave the water supply on for the time being.

One should be careful that water from the storage tank is going to be hot and can burn ones skin. Most heaters are going to be set to a temperature of at the very least 120° F, that can lead to first degree burns on contact.

4. Find the leak’s position

We really do not need to have our Lubbock water heater clients to self diagnose their leaks ahead of phoning us, notably when there is a severe water leak condition occurring, but the more one can the faster we can help. The following is a list of possible explanations why the leak is appearing.

Leaking Water Connections
Look at to ensure the cold water inlet as well as the hot water outlet connections are not loose. They’re ordinarily found at the top of the storage tank. Utilize a pipe wrench to check the connections. This is certainly a simple fix when it is from where the leak is coming.

Leaking T&P Valve
Situated on the side of the storage tank is the temperature and pressure relief valve. It will also have a drain pipe running down to the bottom from it. The valve regulates the level of pressure which builds up inside the storage tank. It is going to let water out when it has to regulate the pressure. This valve may well be the origin of the leak and could need replacing when it doesn’t stay shut securely. Look to verify if any water is leaking from the valve. If water is coming from the valve when its in the shut position, a new valve is going to be needed. This is certainly a major valve of the hot water heater, and one that needs to function effectively. However, replacing it is easy and not expensive.

Danny Lipford suggests that:

Pressure relief valves sometime develop a drip when opened for the first time in years. Try opening and closing it a few times to see if it will seat itself. http://www.todayshomeowner.com/repair-leaking-water-heater-pressure-relief/

Initially, analyze to see if there could be dirt in the valve. Set a bucket below the discharge tube and open up the valve by lifting the tab on the valve. The water that is drained may flush the valve out and remove any debris that may perhaps be in the way.Leaking Water Heater Drain Valve

Various other reasons regarding a T&P valve leak might be high water pressure within the municipal water system, or via a backflow preventer located close to the water meter.

Leaking Drain Valve
Check the drain valve at the bottom of the heater. They are normally made of plastic, and as a result, will be able to wear out with time. Make certain it is closed tight. If the drain valve needs replaced, it is a basic fix.

A drain valve leak could possibly be brought on by dirt within the valve. Attempt this first. Position a bucket underneath the valve and turn the dial to open it. Draining a little water may well flush out the debris. In the event following flushing, it continues to leak, it’ll need to get replaced.

If the leak is coming from here and the valve proceeds to leak because it requires changed, try connecting a hose to it and have the hose go outside. With some luck, that can eliminate the water leaking in the house.

Leak on the bottom of the tank
If the tank leaks from the bottom, it suggests a considerable internal issue. Because of the way the water tank is constructed, being covered in insulation and having an outer skin, whenever it is leaking, it will not be visible from the exterior. An interior water leak normally will likely be visible at the bottom of the storage tank. The more aged the tank is, the much more likely its beginning to decay and deteriorate. A rusting tank will require to get exchanged.

5. Will I need to have a repair or replacement water heater?

Through our experience, we’re able to perform a repair to fix the leak, a lot more often then needing to replace ones heater. The sooner we can take a look at the condition, the sooner we are able to carry out a repair ahead of the damage becoming even worse. We do really advocate that any sort of repairs or replacements be accomplished by a professional and not oneself, to guarantee they are accomplished correctly and up to code. Frequently, manufacturer warranties will be voided if a non-licensed person operates on it.